VEMAG ROBOT HP7E Скачать руководство пользователя страница 114

Страница: 114 / 182

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E

7. Cleaning

7-2

7.2.2 Linking horn (optional)

• Undo linking nut (1) with the universal spanner (2) and remove linking

horn (3). Hold the linking head steady with the second universal span-

ner as you do so.

1 Linking nut

2 Universal spanner

3 Linking horn

Fig. 7-2

Removing the linking horn

(optional)

Warning!

The linking head has a left-hand thread.

• To tighten up:

turn anti-clockwise.

• To undo:

turn clockwise.

7.2.3 Linking gear (optional)

• Undo locking nut (1) with the handle anticlockwise until the bayonet

lugs (2) come free.

• Swing linking gear (3) to the side.
• Remove filler cone (4) from the linking gear if present. To do so, use

the appropriate ejector.

• Lift the linking gear off the bearing journals (5) on the machine

housing.

1 Locking nut

2 Bayonet lugs

3 Linking gear

4 Filler cone

5 Bearing journals

Fig. 7-3

Removing the linking gear

(optional)

Содержание ROBOT HP7E























































































































































































Результаты поиска

Содержание ROBOT HP7E

Отзывы:

Бренды по названию

Популярные бренды

VEMAG ROBOT HP7E, Руководство по эксплуатации

Результаты поиска

Содержание ROBOT HP7E

Отзывы:

Бренды по названию

Популярные бренды