Figure 7:
Cable lead-in
Maximum two line lead-ins, Roxtec, Rox RS Type plugs
Mains and guard circuit connection
The mains can be connected either with or without cable lug both in models with terminal board and in those with
single-conductor bushings.
Connect the power line to the relevant terminals as per the supplied wiring diagram.
Figure 8:
Line connection
Connection without cable lug
Clamp
Connection with cable lug
Single-wire conductor without cable lug
>
When connecting a single-wire conductor without cable lug to terminals with just one screw, bend the conduc-
tor end as illustrated .
Figure 9:
Conductor bushing
Connection without cable lug
Connection with two cable lugs
Connection with one cable lug
Take note of the maximum connectable conductor cross-section for the terminals. If no other data is available on the