56
56
57
The window may be manually operated (
A
). If
opened manually, it must also be closed manually.
Cleaning the pane
Do not open the window with the remote control!
Switch off the mains supply.
Pull the control bar to open the window (
A
).
Rotate the sash fully and secure it in position by
sliding the sash barrel bolt into the bushing at the
bottom left hand corner of the frame (
B
). This safe-
ty feature leaves both hands free for cleaning (
C
).
Clean the pane with a soft, clean, lint-free cloth/
chamois leather/non-abrasive sponge or clean
non-metal window squeegee. Clean water will
normally be suffi cient for cleaning the pane.
Ordinary, non-abrasive household cleaners can
also be used. "Soft" water is best for cleaning
panes. In hard-water areas, a small amount of
detergent can be used to soften the water.
Warning
• Do not use any cleaning products containing
silicone or abrasive particles.
• Do not use chemical products.
• Avoid contact with the pane from all sharp or
abrasive objects including jewellery.
• Never attempt to clean off dirt on the pane with-
out fi rst applying water.
• If any works are taking place in the vicinity of
the pane, protect the pane with a clean plastic
sheet to prevent any splashes or staining from
aggressive compounds.
Closing window in case of power
failure
The chain can be disengaged by
pressing the release clip on the
ventilation fl ap bracket (
D
). Fold
the chain as shown, and close the
window (
E
). When the power is
reconnected, the chain can be re-
engaged by opening the window
manually and running the chain
back into the window operator.
Closing window if the remote
control has been mislaid
The chain can be disengaged by
pressing the release clip on the
ventilation fl ap bracket (
D
) and run
back by pressing the test button on
the window operator (
F
).
E
F
D
A
B
C
Manual operation of the window