MOUNTING ON ACCESS TURNSTILE:
•
Pass the cable through the turk, and through the hole of the turnstile holder and guide it
through the holder.
•
Plug the wiring terminals into the device.
•
Stand upright and make sure the stand and top panel of the pedestal are vertical.
•
Turn the nut and secure the bracket.
•
Plug the wiring terminals into the device and use the 4 supplied M5 screws to secure the
bracket to the device.
•
Adjust the tilt angle according to your needs.
Note: Access turnstile bracket is optional.
CONTENT:
1 x Turnstile holder
1 x Nut
4 x Screws M5
Terminal
Support