6
5
OPERATIONS
1. Turn on the sender and receiver power through ON/OFF switch.
2. Turn on the A/V source (satellite receiver, CD player…) and the A/V display.
3. Adjust the channel selector to the same position.
6
TROUBLE SHOOTING
No picture or sound
Check that both supply adaptors are well connected.
Power ON/OFF switch is in right position.
Check all the cables are well and rightly connected.
Interference in the image and sound
Move your sender or receiver slowly to find the best position for your A/V system.
Cut down on the distance between your sender and receiver.
Check if there is any radio frequency source near your receiver such as a microwave
oven.
If there is any interference radio frequency source near your receiver, try to switch your
channel to get a best performance.
Check if the sender and receiver are in the same channel.
Remote control functions do not work
Check if the remote control unit is going out of battery.
Make sure that your remote control unit is able to align the receiver IR window.
Make sure that both distances between the remote control unit & receiver window and
between the receiver & the sender are within the valid range.
7
TECHNICAL SPECIFICATIONS
SENDER
Frequency range
5.725 ~ 5.865 MHz
Output power
17 dBm
Number of channels
8
Frequency stability
± 100 kHz
Video input level
1 Vpp
Audio input level
1 Vpp
Power supply
9 V
Current consumption
500 mA
Antenna
Dipole
Maximum length indoor operating
20 m
Dimensions
141 x 41 x 85,5 mm
Operating temperature range
-10 ºC ~ 60 ºC
RECEIVER
Frequency range
5.725 ~ 5.865 MHz
Sensitivity
-85 dBm
Number of channels
8
Frequency stability
± 100 KHz
Video input level
1 Vpp
Audio input level
1 Vpp
Power supply
9 V
Current consumption
500 mA
Maximum length indoor operating
20 m
Antenna
Dipole
Dimensions
141 x 41 x 85,5 mm
Operating temperature range
-10 ºC ~ 60 ºC
