5
/
16
Installing Your Front Wheel
1)
Insert the axle into the wheel hub as shown. Add the Slim Spacer on the
LEFT
side (Brake Disk)
and the Wide Spacer on the
RIGHT
side.
2)
Insert the front wheel with the spacers in between the front fork on the bike. Be sure to align the
disk between the brake caliper as shown in Figure 2. Balance the length of the axel at the left
and right side of the fork to make room for the washers and nuts.
3)
Now on the outside add the hooked washer first, facing the hook toward the fork and stuck it in
the gap of the fork end. Add the flat washer and nut on the end of the axel and hand turn until
snug.
4)
Using your wrench, tighten each side alternatively until snug (you might need to secure the
opposite nut slightly so the whole axle doesn’t turn).
5)
Now tighten each nut putting your weight into the wrench. Your front wheel is now installed.
6)
The Adjustment Nut needs to be very tight, be sure to retighten after your first couple
rides.
Brake Caliper and Brake disk on left side of bike
Figure 1
Figure 2
