5
/
16
Installing Your Front Wheel
1)
Insert the axle into the wheel hub as shown. Add the Slim Spacer on the
LEFT
side (Brake Disk),
the Wide Spacer and one washer on the
RIGHT
side.
2)
Insert the front wheel in between the front fork on the bike. Be sure to align the disc between the
brake caliper as shown in Figure 2. Balance the length of the axel at the left and right side of
the fork to make room for the washers and nuts.
3)
Add washer and adjust nut on the two ends of the axel and hand turn until snug.
4)
Using your wrench, tighten each side alternatively until snug (you might need to secure the
opposite nut slightly so the whole axle doesn’t turn).
5)
Now tighten each nut putting your weight into the wrench. Your front wheel is now installed.
6)
The Adjustment Nut needs to be very tight, be sure to retighten after your first couple
rides.
Figure 1
Figure 2
