Velotric Thunder 1ST, Руководство пользователя

Страница: 10 / 30

16
Recommended Torque Values
Always tighten the fasteners to the correct torque. Too much torque can stretch, deform, or break
a fastener or the part it attaches to or tightens. Too little torque can allow the part to move and
may lead to fatigue and breakage of the fastener or the attached part. Either mistake can lead to a
sudden failure of the fastener, causing you to lose control and fall.
Category Fastener Tool Torque Spec. (Nm)
Handlebar
section
Grip clamp bolts M3 Allen key 2-4
Stem clamp bolts M5 Allen key 13-14
Shifter clamp bolt M5 Allen key 8-12
Brake lever clamp bolts M4 Allen key 7-9
Stem faceplate bolts M4 Allen key 6-8
Stem top cap bolt M4 Allen key 7-9
Brake Disc brake bolt M5 Allen key 7-10
Disc brake adapter bolt M5 Allen key 7-10
Brake rotor clamp bolts T25 screw wrench 5-7
Saddle Seatpost clamp bolt M5 Allen key 7-9
Saddle adjustment bolts M6 Allen key 12-14
Frame Control panel mounting bolt M2 Allen key 2-4
Rear derailleur mounting bolt M5 Allen key 8-11
Derailleur cable clamp nut M5 Allen key 4-7
Motor axle nuts 18mm wrench 40-50
Kickstand mounting bolts M5 Allen key 8-12
ADJUSTING FOR
COMFORT AND SAFETY
Adjust the Saddle Height 18
Adjust the Saddle Angle and Horizontal Position 20
Adjust the Brake Lever Positioning 21
Adjust the Stem Angle 22