Q
UASAR
P
AGE
13
OF
14
I
NSTALLING
THE
E
LECTRONICS
Now it’s time to install all the electronic
stuff into the fuselage.
Typically the receiver will be placed in
the section behind the cockpit. This
allows short servo cables. Use velcro or
double-faced scotch tape to hold the
receiver in place.
Best place for the ESC is the room
between Fan and cockpit. Use velcro or
double-faced scotch tape to hold the
ESC on place. For an easy conecting of
the motor wires, you may glue in 3
3.5mm gold connectors as shown in the
picture.
B
ATTERIE
T
RAY
AND
CG
The CG (center of gravity) will be
adjusted with the position of the
batterie pack. So this position is
depending of the used equipement.
Determine in a first step the
aproximated position for the batterie
pack. To do this, all the parts must be
installed into the Quasar.
By changing the position of the batterie
pack find the CG point which is located
440mm behind the fuselage nose.
The batterie pack must be secured well
on its place by using velcro tapes or
similar.
B
UILDING
I
NSTRUCTION
