Veloci Diamond, Инструкция по эксплуатации

Страница: 19 / 24

19
- Press “i” twice quickly to exit the settings.
- The settings will close automatically after 10
seconds.
5. Precautions
- The display is water resistant but should not be
submerged in water.
- Do not expose the display to excessive sunlight
when you are not using the bicycle.
- Regularly check the connection between the
display and the controller.
- Do not use thinner, alcohol, or fuel to clean the
display or other electrical components.
6. Error codes: definitions
The display gives warnings in the event of errors.
An error code (or error code) will then appear at the
location of the speed. In that case, we recommend
removing the battery from the bicycle for a few min-
utes and then reinstalling it. Contact Bizbike custom-
er service via digital assistant Sara or “My support”
on the online platform
My Bizbike if the error code
does not go away or keeps coming back.
Error Code: definitions
Code Description
07 Overvoltage protection
08 Motor hall signal cable error
11 Temperature controller
12 Current sensor error message
13 Battery temperature error
14 Engine temperature error
21 Speed sensor error
22 BMS communication error message
30 Communication error