THANK YOU FOR CHOOSING VELLO
The Umbra screen protector is designed for extended use to protect your camera’s LCD from scratches, dust, smears, and even
impacts. It adheres to the LCD without leaving behind a sticky residue, and it’s rigid, so it’s easy to apply without trapping air
bubbles underneath. The Vello Screen Protector is made from ultra-thin optical glass that allows 98% light transmittance so it won’t
affect the LCD’s appearance or functionality.
1.
Remove any film or
other substances that
are stuck to your
camera’s LCD.
4.
Make sure your
camera is on a stable
surface, and align the
screen protector with
your camera’s LCD.
2.
Clean the LCD with
the wet wipe, and
allow the LCD to dry
before applying the
screen protector.
5.
Press down on the
center of the screen
protector, and push
outwards to apply.
3.
Peel off the backing
film from the screen
protector. Be careful
not to get fingerprints
on this side of the
screen protector.
6.
Open the LCD shade,
and attach it by
aligning its magnetic
strips with the metal
edges of the screen
protector and placing
it onto the LCD.
To remove the Vello Screen Protector, remove the LCD shade, and push the screen protector to the side until you can lift it up to remove it.
Box Contents
• Glass screen protector
• LCD shade
• Wet wipe
• User manual
Please read these instructions carefully before applying your Vello Glass Screen Protector.
