2
Unpacking:
Thank you for purchasing TH-250(WW), Every unit has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the shipping carton for damage
that may have occurred during shipping. If the carton appears to be damaged, carefully inspect
your fixture for any damage and be sure all accessories necessary to operate the unit has arrived
intact. In the case damage has been found or parts are missing, please contact the manufacturer
or your dealer for further instructions. Do not return this unit to your dealer without first contacting.
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR
INSTALLING TH-250(WW), SAVE IT FOR FUTURE REFERENCE.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself;
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact the manufacturer or your dealer.
PLEASE recycle the shipping carton when ever possible.
General Instructions:
To optimize the performance of this product, please read these
operating instructions carefully to familiarize you with the basic operations of this unit. These
instructions contain important safety information regarding the use and maintenance of this unit.
Features
⚫
High CRI
⚫
Color Strobe
⚫
Electronic Dimming 0-100%
⚫
DMX-512 protocol
⚫
Master/Slave synchronization
⚫
LED operation menu with function
buttons
⚫
Daisy Chain Units Together in DMX
Mode
Safety Precautions
⚫
To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
⚫
Do not spill water or other liquids into or on to your unit.
⚫
Be sure that the local power outlet matches that of the required voltage for your unit.
⚫
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove
or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short.
⚫
Disconnect from main power before making any type of connection.
⚫
Do not remove the cover under any conditions. There are no user serviceable parts inside.
⚫
Never operate this unit when it’s cover is removed.
⚫
Never plug this unit in to a dimmer pack.
⚫
Always be sure to mount this unit in an area that will allow proper ven
tilation. Allow about 6” (15cm)
between this device and a wall.
⚫
Do not attempt to operate this unit, if it becomes damaged.
⚫
This unit is intended for indoor use only; use of this product outdoors voids all warranties.
⚫
During long periods of non-use, discon
nect the unit’s main power.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain
or moisture.
PLEASE
consider that damages caused by manual modifications to the device are not subject
to warranty.