background image

 

- 1 - 

 

INSTRUCTION

 

Thank  you  for  purchasing

 

LED  Profile  250(Zoom+CTO)

every  unit  has  been thoroughly  tested and shipped in 

perfect condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the 

carton  appears  to  be  damaged,  carefully  inspect  your  unit  for  any  damage  and  be  sure  all  accessories 

necessary to operate the unit has arrived well. In the case damage has been found or parts are missing, please 

contact  the manufacturer or  your  dealer  for  further  instructions. Do  not  return  this  unit  to  your  dealer without 

pre-notice.. 

 

DESCRIPTION OF THE DEVICE 

 
1.  Profile 

With the idea of energy saving and environment protection, the device use low power loss and extremely high 

efficiency  led.  The  device  housing  cover  is  made  of  used  the  new  high  strength  heat  resistance  engineering 

plastics, with beautiful shape and smooth lines. The designing and manufacturing is in compliance with the IEC 

standard. The device is suitable in the large-scale theatrical performance, the theater, the performance hall, the 

bar, nightclub and so on. 

The  product  conforms  to  the  international  standard  DMX512  agreement  completely;  the  device  can  be 

controlled in signal, and also be controlled in many units. 

 

2.Overview (758x343x305mm) 

 

 
3.Specification   

Model: LED Profile 250( Zoom+ CTO)

                                         

 

Lamp: TW high power 250W 2in1 LED 

            WW 3000K 125W+CW 6000K 125W                               

Power Supply: AC100V-250V, 50Hz/60Hz                                 

Power consumption: 300W                                                             

CTO: 3000K-6000K linear adjustment                                                                     

Manual zoom range: 15

°

-55

°

                                           

CRI>96                                                                                                                                                                 

DMX Channel: 2/4CHs                                                                     

LCD display                                                                                       

High quality optical system                                                                                               

N.W.: 13.6kgs                                               

                   

 

4. Safety Precautions 

 Be sure that the local power outlet match that of the required voltage for your unit, 

 

 Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or 

break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock 

and fire in case of an internal short. 

   

                             

 

 Disconnect from main power before making any type of connection. 

 

 Do not remove the cover under any conditions. There are user serviceable parts inside. 

Содержание LED Profile 250









Отзывы: