13
4.
If a signal is still not found, Sync-Code
Matching is necessary. Press the Menu
button on the Receiver, and use the
Left and Right selection buttons to
select Sync. Use the Up and Down
selection buttons to select Yes, and
press the OK button. (The Status LED
Indicator will glow green while this Sync
process occurs.) Then press and hold
the Code button on the Transmitter
for two seconds. The Status LED
Indicator will flash red until the process
is finished.
5.
When the signal of the Transmitter is
found, the Receiver LCD screen will
show the real-time view of either the
Transmitter’s camera or the DSLR
camera’s LCD.
SYNCHRONIZING TRANSMITTER AND RECEIVER
Содержание FreeWave Viewer
Страница 1: ...FREEWAVE VIEWER WIRELESS LIVE VIEW REMOTE...