Vello Freewave Fusion Pro, Руководство пользователя

Страница: 22 / 24

22
Problems with the FreeWave Fusion Pro
can usually be traced to the following
most common causes. Perform the
following steps to diagnose and correct
the problem:
Check the contact between the light’s hot
shoe foot and the Receiver’s hot shoe.
Make sure the light’s locking switch is set
to the lock position.
Check that the shutter release cable and/
or studio light cable are in good condition
and properly connected.
Make sure that the Receiver is powered
on and at the correct setting.
Remove the batteries from the
Transmitter and Receiver and change the
channel by switching the channel switches
to a different combination, taking care
to ensure that both the Transmitter and
Receiver are set identically.
If you encounter any interference on the
initial setting, try changing the channel
by choosing a different channel switch
combination.
When using the FreeWave Fusion Pro as
a shutter release, you may not be able
to release the shutter on your camera if
the lens is set to Auto Focus and cannot
focus on the subject. Switch your camera
to manual focus to ensure proper shutter
release.
TROUBLESHOOTING