3
Product overview
The Whadda digital LED strip driver module is designed to make it easy to drive and switch 12 V LED strips
with 5 V devices such as Arduino® compatible boards. The module features a step-up boost converter which
is designed to convert a 5 V input voltage to 12 V to drive the LED strip. The signal pin on the module can be
used to switch the converter on or off when applying a HIGH or LOW input signal respectively.
Note that the module is not designed to work with PWM signals, the input signal must be either a steady 5 V
or GND.
Specifications:
Supply voltage: 5 V DC
Output voltage: 12 V DC
Output connector: 2-pin JST XH
Maximum input current: 1 A
Maximum output current: 200 mA
Weight: g
Dimensions (W x L x H): 37 x 22 x 10,2 mm
Wiring description
Pin
Name
Arduino
®
connection
S Signal pin
Digital Pin (e.g. D)
VCC Supply voltage (5 V DC)
5V
GND Ground
GND
