Velleman VTSSD6, Руководство пользователя

Страница: 5 / 54

VTSSD6
V. 01
–
15/01/2019 5 ©Velleman nv
4. Overview
Refer to the illustrations on page 2 of this manual.
# Function Description
1
heating
The element is heating up and the temperature increases.
When the symbol flashes, the temperature is being
maintained at the set value.
2
cooling
The element is cooling down and the temperature is
decreasing. The fan may be whirling.
3
standby
The element is in standby mode. The nozzle is possible at
or near room temperature.
CAUTION
–
Metal parts may still be hot!
4 airflow Use the arrows to set the airflow rate from 0 to 200 cm³/s.
5
channel preset
Select CH0, CH1, CH2 or CH3 by pressing the green button
on the hand tool. CH0 is the default operating mode.
6
temperature
adjustment
Use the arrows to set increase/decrease the temperature.
7
temperature unit As set by the user.
8
correction value Correction value for the heating element.
9
SET/ENTER buttons Setting buttons.
5. Installation
1. Install the appliance on a flat, stable and fire-resistant surface.
2. Make sure that the power switch at the back of the appliance is in the off
position (0).
3. Plug the power cord into a suitable, earthed mains outlet.
6. Operation
6.1 Precautions

Make sure both the heater and nozzle are cool before attaching the nozzle.

To use a nozzle, simply slide the nozzle over the air mouth of the air gun. To
remove the nozzle, you can use the U-shaped on the base of the cradle.

At first use, the nozzle may emit some smoke. This is normal and it will disappear
the more you use the nozzle.

Never aim the nozzle at persons or animals. Keep hot air coming from the nozzle
away from the eyes and face.

After use, always leave the nozzle to cool down, switch off and disconnect the
appliance from the mains.