VTSSC80
V. 01
–
25/10/2019
5
©Velleman nv
3.
General Guidelines
•
Refer to the Velleman
®
Service and Quality Warranty on the last pages of this
manual.
•
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
•
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect)
–
of any nature (financial, physical…) arising
from the possession, use or failure of this product.
•
Keep this manual for future reference.
4.
How to Solder
•
File off any dirt, rust or paint on the parts you wish to solder.
•
Heat the parts with the soldering iron.
•
Apply resin-based solder to the part and melt it with the soldering iron.
Be sure to apply a solder paste to the part before applying non resin-based solder.
•
Wait for the solder to cool and harden before moving the soldered part.
CAUTION
–
Handle a heated soldering iron with extreme care as the high temperatures
may cause burns.
•
The soldering iron may produce smoke at first use due to a dried-out heating
element. This is normal and should only last for approx. 10 minutes.
•
Never file the soldering tip.
•
Use a soldering iron stand in order to avoid burns.
•
The temperature of the soldering iron will drop if it is used without the tip.
•
Let the soldering iron cool after use.
•
The mains cable of this device should not be replaced. Discard the device if the
power cable has been damaged.
•
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Cleaning and user maintenance shall not be made by children without supervision.
•
File off any dirt, rust or paint on the parts you wish to solder.
•
Heat the parts with the soldering iron.
