VRC8 GB
5
LEARN MODE
The VRC8 disposes of memory banks for 10 devices. Each device
can hold a max. of 41 single data (code) keys and 6 special multi-
code keys. It also allows users to store the codes for multiple original
remotes by using only 1 device.
Place an original remote
’lens-to-lens’ with the VRC8
infrared sensor window at a
distance of about 5-8cm (2-3
inches).
1. Press the LEARN button to
initiate the learn mode and
the red LED will blink.
2. Press a device button (e.g.
TV) to select the memory
bank of that particular device.
3. Press the desired storage
button (e.g. button 1). The
red LED will stay on. (If no
data are received within 30
seconds, the LED will
indicate "error" & the unit will
go back to learn mode).
4. Press and hold the
corresponding button from
the original remote (e.g.
button 1) until the green
LED comes on.
The red LED will blink again if the
learning mode is finished. Repeat
step (3) in order to program another
storage button.
If the LED indicates ’ERROR’, (two
LEDs blinking simultaneously),
please check to see whether you
have executed the steps correctly
and whether the heads of the 2
remotes are lens-to-lens. Repeat
step (3).
5. : The device will exit the learn mode if you press the LEARN
button again or if you do not press any other button within 15
seconds.
