6
ENGLISH
3. Address selection
In order to identify each module in your system it is necessary to set an unique address
for each module. This address will also be used by the PC software to scan all the ad-
dresses and to identify the modules.
CAUTION:
Addresses 81,91,A1, B1, C1, D1, E1, F1 & FF can NOT be used, they are
reserved for learning modes.
Examples of valid addresses: 01, 02, 03…. 0A, 0B…, 1A, 1B…
A total of 248 valid addresses can be selected for this module.
0
1
Example of a valid address: “0 1”
VMB1TS : ADDRESS SETTING USING THE 2 ADDR ROTARY SWITCHES.
1. Press and HOLD the ‘Menu’ button to open the extended menu.
2. Scroll through the extended menu using
↑
or
↓
buttons until the
‘’Configuration” menu appears, select using the
→
button.
3. Scroll through the Configuration menu using
↑
or
↓
buttons until the
‘’Address” menu appears
4. Select the Address menu using the
→
button.
5. Enter a unique address (‘01’...‘FE’) using the
↑
or
↓
button.
6. Confirm the address using the
→
button.
7. Exit the menu using the
button.
VMB1TC : ADDRESS SETTING USING THE MENU
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
3
4
2
1
6
7
5
Each module on the Velbus system must have its own
unique address, write down the address for later use!
Содержание VMB1TC
Страница 17: ...17 Program step overview ENGLISH...
Страница 23: ......