Velleman VMA501, Руководство пользователя

Страница: 3 / 31

VMA501
V. 02 – 05/04/2019 3 ©Velleman nv
5. Contents
 1 x ATmega328 UNO DEVELOPMENT BOARD (VMA100)
 15 x LED (different colors)
 8 x 220 Ω resistor (RA220E0)
 5 x 1k resistor (RA1K0)
 5 x 10k resistor (RA10K0)
 1 x 830 hole breadboard
 1 x RGB LED module (VMA318)
 4 x 4-pin Key switch
 1 x active buzzer (VMA319)
 1 x passive buzzer
 1 x 1838 IR infrared 37.9 kHz receiver (VMA317)
 1 x infrared remote control
 1 x infrared sensor diode
 1 x LM35 temperature sensor (LM35DZ)
 2 x ball tilt switch (similar to MERS4 & MERS5)
 3 x photosensitive transistor
 1 x 74HC595 shift register (HC595)
 1 x battery holder for 6 AA batteries (similar to BH363B)
 1 x 8*8 LED matrix display
 1 x single-digit 7-segment LED display
 1 x 4-digit 7-segment LED display
 30 x breadboard jumper wire
 1 x USB cable
6. The ATmega328
VMA100
The VMA100 (Arduino ® Uno compatible) is a microcontroller board based on the ATmega328. It has 14 digital
input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz ceramic resonator,
a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to
support the microcontroller. Connect it to a computer with a USB cable or power it with an AC-to-DC adapter
or battery to get started.