Velleman VLE8, Руководство пользователя

Страница: 5 / 17

VLE8
V. 01 – 14/12/2015 5 ©Velleman nv
Li-Fe
voltage level 3.3 V/cell
max. charge voltage 3.6 V/cell
allowable fast charge current ≤ 4 A
discharge voltage cut-off level ≥ 2.0 V/cell
Pb
voltage level 2.0 V/cell
max. charge voltage 2.46 V/cell
allowable fast charge current ≤ 0.4 A
discharge voltage cut-off level ≥ 1.75 V/cell
4. General Guidelines
Refer to the
Velleman® Service and Quality Warranty
on the last pages of this manual.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
·
Familiarise yourself with the functions of the device before actually using it.
·
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
·
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorized way will void the warranty.
·
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
·
Do not
use outside the technical specifications.
·
Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or
indirect)
– of any nature (financial, physical…) arising from the possession, use or failure of this product.
·
Due to constant product improvements, the actual product appearance might differ from the shown images .
·
Product images are for illustrative purposes only.
·
Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the
device against damage by leaving it switched off until it has reached room temperature.
·
Keep this manual for future reference.
5. Features
The VLE8 is an advanced charger, able to charge, balance and discharge rechargeable batteries. It is
microprocessor-controlled just like all the best chargers and will balance the individual cells in your Li-XX
batteries. It will charge from 0.1 to 5.0 A and is capable of charging packs up to 6S packs. It features input
voltage protection so as not to flatten your car battery at the field and will also storage charge your packs for
when you are not using them. You can power it with any power supply delivering from 11 to 18 V.
·
microprocessor-controlled
·
delta-peak sensitivity
·
individual cell balancing
·
supports: Li-ion, Li-poly, Li-Fe, NiCd, NiMH
·
wide range of charge currents
·
storage charge function
·
time limit function
·
input voltage monitoring (protects car batteries at the field)
·
data storage (stores up to 5 packs in its memory)
·
battery break-in and cycling
Special Features
Optimized operating software:
The charger features an automatic function that sets the feeding current
during charging and discharging. Especially for lithium batteries, it can prevent from overcharging, which
may lead to an exploding battery. The function automatically disconnects the circuit and buzzes if the
malfunction is detected. All the settings are configurable by the user.