Velleman VASDAC, Руководство пользователя, Страница: 5 / 29

VASDAC
V. 02
–
04/04/2013 5 ©Velleman nv
Use only one type of input cable at the same time. Do not use TOSLINK and
S/PDIF coaxial cables together.
2. Connect the cable to the correct input:
o
Connect the TOSLINK cable to the OPTICAL IN input [2] and connect
the other end to the TOSLINK output of your audio/video device [8] .
o
Connect the coax cable to the COAXIAL IN input [1] and connect the
other end to the audio output of your audio/video device [9] .
3. Connect the RCA cable (incl.) to the L-AUDIO-R OUT jacks [4,5] (white
RCA plug in the white jack; red RCA plug in the red jack) and connect
the other end of the cable to your amplifier
[10] .
4. Connect the power adapter (incl.) to the DC jack [6] and plug the other
end into a suitable power outlet. The power indicator [3] lights.
5. Switch on all connected audio/video devices.
7. Technical Specifications
input
TOSLINK EIAJ RC-5720B rectangular type plug
coaxial RCA type connector
output
analogue stereo audio 2 x RCA type connectors
audio format support LPCM 44 kHz, 48 kHz, and 96 kHz
power supply 5 VDC, 600 mA (incl.)
dimensions 50 x 78 x 24 mm
weight 45 g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior
notice.
TOSLINK® is a registered trademark of Toshiba Corporation.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved.
No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.