PCS500 / PCS100 / K8031
16
Menu Options
(some options depend on selected module)
File Menu
Open Image
Opens an image file and displays it on the screen.
Open DSO Data
Opens and displays the waveform data saved in text format using the
Save
DSO Data
option.
Save Image
Saves the image to a file in Windows Bitmap (*.BMP) format.
Image is saved in gray scale. Use
Edit/Copy
menu to get full color images to
other applications.
Save DSO Data
Saves the waveform data in text format. All captured data (4096
points/channel, 4080 points/channel in PCS100 / K8031) is saved.
Save FFT Data
Saves the FFT data in text format. Only the portion of the data displayed on the
screen is saved (250 points, 240 points in PCS100 / K8031).
Note:
Default subdirectory (folder)
\DATA
for image and data files is created
when the program is run the first time.
Prints the image in gray scale. Printer must be connected to other LPT port
than the oscilloscope. You can edit the image caption.
Print Setup
Selects a printer and sets printer options before printing. The available
options depend on the printer you select.
Exit
Terminates the program.
Calibrate & Exit
Makes the oscilloscope calibration, saves the calibration values to the
WinDSO.INI file and terminates the program. This option should be used
when the new oscilloscope has been on for about 1h.
This option performs following operations:
1. The fine adjustment of the trace Y-position (offset) on different
Volt/Div and Time/Div scales.
2. Sets the trace labels (on the left side of the screen) to correspond the
trace GND level.
3. Sets the triggering level mark to correspond the triggering level
(PCS500 only).
