KNS2 – STEGOMECH
1. Introduction & Characteristics
Dispose of this product in accordance with Local and national disposal regulations.
Thank you for buying the
KNS2
! Read this manual carefully before bringing the device into use.
•
Easy to build, no glue or soldering required.
•
Dislodge pre-cut pieces when you need them, not before. Sand any jagged edges before use (sandpaper included)
•
The kit is powered by 2 AA-batteries (not included).
The kits of the KNS-series are supplied with prepunched boards, a gearbox, gears, shafts, a switch, a motor, a
battery holder and all necessary parts.
2. Parts List
Part n° Quant.
Description
Part n° Quant.
Description
1
1 gearbox
15
1
wire with terminal (yellow)
2
1 motor
3Vdc
16
1
wire with terminal (green)
3
1
pinion gear 8T
17
1 battery
holder
4
1
gear 40T/0T (white)
18
1
slide switch with wire
5
1
gear 40T/10T (red)
19
20
self-tapping screw (2 x 4mm)
6
1
gear 40T/10T (green)
20
4
self-tapping screw (2 x 6mm)
7
1
face gear 36T/10T (white)
21
2 rivet
(17.5mm)
8
1
metal shaft (3 x 52mm)
22
2 rivet
(20mm)
9
1
metal shaft (2 x 40mm)
23
2 rivet
(23mm)
10
2
nylon post (small)
24
6 washer
11
2 nylon
pad
25
3
PVC tube (15mm)
12
2 nylon
connector
26
4
fixing plate (large)
13
12
nylon pad (Ø8mm)
27
2
fixing plate (small)
14
6 nylon
cap
Fig.1
KNS2
- 1 -
VELLEMAN
