Velleman K8095, Инструкция по сборке

Страница: 11 / 16

11
Connection
26. Connection
Connect a pair of speakers to the speaker connector.
Use 4 – 8 ohms speakers (L+ and R+) and connect the common (-) to the centre tab.
If you use multiple speakers for multi-room use, it is advised to use the unit with MONO output.
To do this, add a shunt over the MONO pin header.
You can connect an optional power amplifier to this output.
You can connect a headphone to this output.
NOTE: The volume of all the outputs is controlled by the player master volume.
Hint: If multiple speakers are used you can connect speakers in parallel.
Example:
Use 4 x 8-ohm speakers.
Connect 2 speaker sets in series (8 + 8 =16 ohms).
Then connect this set in parallel (16/2) = 8 ohms.
Now these 4 speakers can be connected to the L or R output.
Speakers
RCA out
Headphone out