
12
1. Sticking the Keyboard :
q
Remove the covers of the housing.
q
Stick the keyboard onto the housing, with the
connection lip in the saving, so that the LED window
corresponds with the hole in the aluminium.
2. Mounting the pcb :
q
Carefully push the pcb into the housing (fig.4.0)
FIG 4.0
q
Carefully insert the pcb cable of the keyboard into the
connector. Pay attention to the position of the pcb (fig.
5.0).
FIG 5.0
q
Pay attention to the position of the three IR LED’s and
of the red indication LED!
q
Run the battery holder from the opposite side trough
the housing and fill up the room behind the pcb with
the piece of foam-rubber supplied with the kit.
15. Mounting the housing
Mounting the housing
Содержание K4101
Страница 2: ...VELLEMAN Components NV Legen Heirweg 33 9890 Gavere Belgium http www velleman be ...
Страница 14: ...14 17 PCB Layout PCB Layout ...
Страница 15: ...15 18 Diagram Diagram ...