H) User Code Entry Modes (Auto or Manual) –
Installer Programming
(Default: Manual)
Loca�on
Func�on Codes
Confirm
Comments
I) Pacifier Tones (Key-press beeps) –
Installer Programming
(Default: ON)
Loca�on
Func�on Codes
Confirm
Comments
Pacifier tone OFF, good for silent environment
Pacifier tone ON for every key-press
(default)
J) Main LED Flashing ON-OFF –
Installer Programming
(Default: Flashing)
Loca�on
Func�on Codes
Confirm
Comments
K) Egress Delay & Warning –
Installer Programming
(Default: Instant, No warning)
Loca�on
Delay Op�ons
Confirm
Comments
0 to 4
Five delay op�ons for opera�ng Output 1 with egress bu�on:
0 – Instant ac�va�on, no delay and warning
(default)
1 – Momentary contact, 5 seconds delay with warning
2 – Momentary contact, 10 seconds delay with warning
3 – Hold contact, 5 seconds delay with warning
4 – Hold contact, 10 seconds delay with warning
L) Delay Time to Start Door Propped-up Warning –
Installer Programming
(Default: OFF)
Loca�on
Delay Time
Confirm
Comments
0
No propped-up Warning
(default)
1 to 999
M) Exit Programming Mode
Confirm
Comments
It is always necessary to set keypad back to normal opera�ons a�er programming
Manual Entry Mode requires to enter
bu�on a�er the user
codes.
It is NOT necessary to set the Master Code and all User
Codes in the same digit length. They can be 4-8 digits mixed
arbitrary
(default)
Auto Entry Mode does not need to enter
bu�on a�er the user
codes. However, All the User Codes MUST be in the same digit
length of the Master Code and they can be 4-8 digits
Delay �me from 1 to 999 seconds before door propped-up
Warning starts
.
while the door is stuck and le� open
Main LED OFF during system standby, good for people do not like
flashing LED at night
Main LED flashing during system standby
(default)
10
