Velleman HAA80, Руководство пользователя

Страница: 4 / 26

HAA80
V. 02 – 10/06/2020 4 ©Velleman nv
• Damage caused by disregard of certain guidelines in this
manual is not covered by the warranty and the dealer will
not accept responsibility for any ensuing defects or
problems.
• Nor Velleman nv nor its dealers can be held responsible for
any damage (extraordinary, incidental or indirect)
– of any
nature (financial, physical…) arising from the possession,
use or failure of this product.
• Keep this manual for future reference.
4. Description
1-2
N.O. contact of the key switch (max. 3 A). Turn the key
clockwise 90° in order to establish contact.
3-8
Green LED with an internal resistor of 1 kΩ , connected
in series. Connect the positive (+) power supply of
12 VDC with 3 and the ground connection (-) with 8.
4-7
Red LED with an internal resistor of 1 kΩ , connected in
series. Connect the positive (+) power supply of
12 VDC with 4 and the ground connection (-) with 7.
5-6
The N.C. contact of the anti-tamper switch (max. 0.5 A)
is closed when the housing is closed. Slide the flexible
sleeve (included) over the lever of the anti-tamper
switch, ensuring that the latter is pressed down when
the housing is closed.
5. Connection Terminals
A green
B red
C tamper switch
D key switch
E 5-core wire
F alarm control panel
G ON/OFF control
H +12V supply
I tamper
J red LED (-)
K green LED (-)