Velleman H8009, Инструкция по сборке, Страница: 7 / 24

7
Construction
Your own individual code can be set for a transmitter/clock combination. There is
a row of nine code pads that are the closest to IC1, only one code connection is
used. The code can be set by linking the code pad to a neighbouring "-" pad or "+"
pad by using a jumper lead. JC1 and JC2 are located on the
main PCB P8009 .
There are 3 different combinations possible:
1. JC1 and JC2 are not mounted on the main PCB, then do not mount code
jumpers on the transmitter.
2. JC1 is mounted on the main PCB, Mount a jumper like in the drawing:
3. JC2 is mounted on the main PCB, Mount a jumper like in the drawing:
In case of a “ wired ” remote, continue the assembly.
In case of a wireless remote, the transmitter PCB can be placed in his enclosure.
Fit a new 12V battery type V23GA or GP23A. Check the polarity which is shown
in the enclosure.
REMARK: If the buttons do not “click”, please check the position of the PCB. It
is also possible that the first time, you have to press firmly the button cap before
they work properly.
14. Create your code
Affix the supplied sticker to the housing.
15. Sticker
Velleman
SRFCE
433,92 MHz