CAMWH4
3
VELLEMAN
5. Uninstalling the source board
A. Remove all cables that are connected to the source board.
B. Remove the 4 screws that hold the source board platform in place.
C. Take the platform out of the housing and remove the source board from the platform.
6. Optional Bracket: CAMB10
Attach the bracket to the wall with the enclosed screws.
Attach the camera on the bracket with the E screws (see p.1).
Adjust the camera angle to a suitable position.
7. Technical Specifications
Pick-up element
1/3" colour CCD sensor
Number of pixels
512 (H) x 582 (V) <PAL>
Resolution
350 TV lines
Min. illumination
0.3Lux/F1.2 ; 0Lux/F1.2 (LED on)
BLC
on/off
Sharpness
soft/sharp selectable
S/N ratio
more than 48dB (AGC off)
Electronic shutter
1/50 to 1/100.000 sec.
Gamma
0.45
Iris mode
V.D. / D.D. / AES selectable (lens is optional)
Video output
1.0Vp-p composite, 75
Ω
Power source
100~240Vac ±10% (47Hz~63Hz) switching power supply
Power consumption
12W
White LEDs
18
Effective range
>15m (F2.0) ; 20m (F1.4)
Heater
yes
Operating temperature -20~+60°C
Dimensions (L x W x H) 349 x 115.5 x 114mm
Lens (optional)
C/CS mounted (e.g.
CAML12
,
CAML13
,
CAML14
,
CAML15
etc.)
The information in this manual is subject to change without prior notice.
