Velleman-Kit K8016, Иллюстрированное руководство по сборке

Страница: 10 / 16

10
assembly
IC23: 7805 (UA7805P) - This regulator must be isolated plastic type !
Attention : The voltage regulator is a fully isolated (plastic) type because it has to
be isolated galvanically from the rear panel. Mount the voltage regulator on the
rear panel and fasten it with the supplied M3 bolt, washer and nut as shown on
the drawing. Position the PCB together with the front and rear panel in the bot-
tom half of the enclosure. Now the voltage regulator can be soldered at the
component side of the PCB, not at the solder side. Do not fasten the PCB yet.
Assemble the enclosure as following:
16. Voltage regulator and PCB assembly
M3 N UT
M3 LOCK WASHER
VOLTAGE REGULATOR
M3 BOLT