9
IMPORTANT:
•
Before mounting the PCB into the enclosure, be sure to
trim all the leads !
•
Bend C6 like in the drawing:
•
For adjusting the receiver, a completely plastic tuning
screwdriver is needed. This is supplied with the receiver.
•
The transmitter must be in its housing with cover on, and
fitted with a new battery type V23GA or GP23A. Check the
polarity which is shown in the enclosure.
•
The receiver may not be in the vicinity of a metal object.
•
The transmitter and receiver must have the same code.
•
On the receiver K6707, either jumper lead CH1 has to be
mounted in order to be operated by button SW1 (big) of the
transmitter, or jumper lead CH2 has to be mounted for op-
eration by button SW2 (small).
Test and set-up
Test & set-up
C6
