Velleman-Kit K4004B, Иллюстрированное руководство по сборке

Страница: 13 / 16

13
As a mono-bridged amplifier:
See Fig. 8.0 for the connection of the power supply and the speaker. Make sure that the impedance of the
connected speaker is not less than 8 ohms.
IMPORTANT: Always connect the outputs first, before the power supply is switched on.
If the amplifier is to be used as a free-standing unit, it may be attached by means of M4 hexagonal bolts and
the corresponding slots in the heat sink.
Use & connection
RMS
SUPPLY
POWER
MONO BRIDGE : 100W
K4004
APS200
-V
GND
+V
BRIDGE
INPUT
LS
+LS
+
-
MIN. 8 Ohm
GND
+V
-V
GND
Fig 8.0