Kiddo Space
21
3.
After adjusting the seat angle, tighten the four hexagon socket nuts on both sides of the
wheelchair so they are finger-tight again.
Figure 11: Adjusting the positive seat angle
9.2.2.2
Adjusting the negative seat angle
In this case, the child has to get out of the wheelchair.
1.
Fully loosen the four hexagon socket screws (see Figure 12, item 1, Figure 13, item 3) used
to attach the seat (see section 9.1.1 Adjusting) on both sides of the wheelchair and remove
the seat.
2.
Remove the two seat supports (see Figure 13, item 2) by loosening the nuts (see Figure 13,
item 3) and removing the carriage screws (see Figure 13, item 4).
3.
Turn the left seat support 180° around the longitudinal axis and reattach it with the carriage
screws (see Figure 13, item 4) and the nuts (see Figure 13, item 3) on the right side (the lip
is now facing up).
4.
Repeat these steps for the seat support on the right side.
5.
Reattach the seat with the four hexagon socket screws.
After attaching the seat, the child can be put back in the wheelchair to adjust the seat depth and
seat angle.
Figure 12: Repositioning the seat supports
Содержание Kiddo Space
Страница 1: ...Kiddo Space Instructions for use...
Страница 42: ...Kiddo Space 42...
Страница 43: ...Kiddo Space 43...
Страница 44: ...Your specialist dealer Veldink4kids Drentse Poort 15 A Nieuw Buinen 9521 JA Nederland 647H1763 EN_INT 02 2301...