- 15 -
WARRANTEE OBLIGATIONS
1. The manufacturer guarantees that the greenhouse frame (hereinafter referred to as
the product) is new, fully equipped, and free from manufacturing defects.
2. The manufacturer is responsible for the completeness of the product.
3. The manufacturer is responsible for the assembly of the product according to the
instructions.
4. The warranty period for this product is twelve (12) months from the date of sale to
the purchaser through the retail network.
5. The warranty covers any manufacturing and material defects.
6. The warranty does not cover damage caused by corrosion of the product design
elements, snow and wind loads (more than 10 m/s).
7. The warranty is terminated in the following cases:
-
failure to comply with the assembly and installation instructions;
-
failure to comply with the requirements for greenhouse operation;
-
in case of use of the greenhouse for purposes other than those for which it is
intended;
-
in the event of force majeure (natural disasters);
-
in the absence of the product datasheet.
8. The warranty does not cover cellular polycarbonate.
Warning!
In winter, in order to prevent deformation of the greenhouse parts under the exposure of
snow and wind loads, it is necessary to remove all sheets of multiwall polycarbonate from the
arched part of the greenhouse (the greenhouse roof) by removing tie bands. The advantage of
sheets removing for winter is that the snow gets inside the greenhouse, which during melting
enriches the soil with useful minerals and protects it from desalinization. An open roof over the
winter prevents pests from crawling into the warm greenhouse with the onset of cold weather
and eating the young shoots in the spring.
If it is not possible to dismantle the sheets, the arches should be enhanced from the inside
with T-shaped wooden supports (from a wooden bar of at least 50x50 section), by placing them
inside the greenhouse - one bar for each arch. Wooden supports are not included in the kit,
make your own. Depending on the climatic conditions and/or location of the greenhouse, it is
up to the purchaser to assess the possible snow load and, if necessary, to provide supports or
remove snow from the frame.
Failure to comply with the requirements above shall be the reason for rejection of product
warranty service.
Do not install the greenhouse closer than 2 meters to buildings, safety enclosures and
fences. If the greenhouse is installed in windy area, ensure its firmly fastening to the ground
using appropriate means (rod, rebar, etc.). Do not subject the greenhouse frame to excessive
mechanical stresses. Do not modify the construction of the product yourself.
