Velbus VMBKP, Руководство пользователя, Страница: 30 / 44

VMBKP
30
Velbus – Legen Heirweg 33, BE-9890 Gavere, Belgium – tel. +32 9 384 36 11 – e-mail: info@velbus.eu – www.velbus.eu PN-VMBKP-ed1-A4
1. Location
•
Enter location 7 1
2. Function modes for notification tones: the Notification Tones are the beep tones including Successful Key entry
signal (1 beep) and Unsuccessful User
Code/Card entry signal (5 beeps). (Cfr. “ Buzzer tones & led signals ” on p. 11
for more information).
NOTE: The beeps for the Warning and the Power-up Delay are not notification tones and can not be turned OFF.
•
1: Notification tones ON (default)
All the Notification Tones available on the keypad are enabled. They are the response tones indicating the
operation status of the keypad after a Card/User Code is entered.
•
2: Notification tones OFF
All the Notification Tones are OFF. Well suited for environments where silence is important.
3. Validation
•
Press the # key once. A double beep confirms the entry.
Channel State Announcer (location 72)
Location Function modes Validation
7 2 1 or 0 #
(1) (2) (3)
1. Location
•
Enter location 7 2
2. Function modes for the Channel State Announcer: The Channel State Announcer emits a sound signal representing
the status of the User Group channels. The Channel State Announcer signal is also OFF while the Notification Tone
in Location 71 is set to OFF.
•
0: No notification
The channel state notification is OFF but the normal Notification tones are not affected (see location 71 above
for those).
•
1: 1 Second Notification (default)
A 1 second notification beep is emitted when the User Group channel activates. This notifies the person outside
that the lock is released and the door can be opened. Well suited for door locks that emit no sound when
activating, such as a magnetic lock.
•
2: 2 Short Beeps notification
2 short beeps are emitted when the User Group channel activates.
3. Validation
•
Press the # key once. A double beep confirms the entry.
Status LED flashing during standby (location 73)
Location Function modes Validation
7 3 1 or 0 #
(1) (2) (3)
1. Location
•
Key in location 7 3
2. Function modes for standby flashing light: Some people find the flashing light of the status LED (the amber LED)
annoying during standby, especially at night. The standby flashing can be switched on or off with this setting.
•
1: Standby flashing ON (default)
The Status LED flashes during standby. It also indicates the operation status of the system.