Velbus VMBKP, Руководство пользователя, Страница: 11 / 44

VMBKP
11
Velbus – Legen Heirweg 33, BE-9890 Gavere, Belgium – tel. +32 9 384 36 11 – e-mail: info@velbus.eu – www.velbus.eu PN-VMBKP-ed1-A4
Facilities
On-board led indicators
GREEN (Right): lights up when User Group 1 channel is “pressed”.
AMBER (Centre): flashes in Standby. Together with the beep tones it reflects the system status. The standby flashing can
be turned OFF, see “ Status LED flashing during standby (location 73) ” on p. 30 for more information.
RED (Left): lights up when User Group 2 channel is “pressed”.
Buzzer tones & led signals
The buzzer and the amber (centre) LED indicator emit the following tones and signals reflecting the system status:
STATUS TONES (*) AMBER LED SIGNAL
In Programming Mode none ON
Successful Key Entry 1 beep 1 Flash
Successful Code / Card Entry 2 beeps 2 Flashes
Unsuccessful Code / Card Entry 5 beeps 5 Flashes
Power Up Delay Continuous beeps Continuous flashes
User Group Channel Activation (**) 1 second long beep none
In Standby (***) none Slow flashing (1 second intervals)
System Refreshing none Fast flashes for 2.5 minutes
Card or Code already stored in system 1 long beep none
Real-time clock stopped after power failure Continuously 3 fast beeps per 5 seconds none
NOTES
(*) All buzzer tones can be turned ON or OFF through the programming option at location 71
(* *) The User Group channel activation beep mode can be selected through the programming option at location 72
(* * *) The Standby flashing can be turned ON or OFF through the programming option at location 73