6.0 OPERATING
From remote controller it is possible to select the On / 0ft mode, the cooling, heating mode, to change the set point
temperature ( + / - ), to select the fan speed ( min, med, max, auto).
The room thermostat must be installed in a proper position, away from direct heat source. The set point temperature
and real value are shown on the thermostat display.
ON/OFF
dlil!]il!)
=
◊
�
DISPLAY
oo
lllll
$
� (!)
&I � 111 .<\r/1/
(
l'\1!111/'@
�
& &&)
The room thermostat has to be connected with the PCB through the 5 m cable ( supplied with the unit).
For the user interface display operation please read carefully the specific instructions attached
Control Panel PIN Out
VeWiFi versions are provided with Velair app, available on
lnstruction manual
Pag.18of28
Date 2019-12-20
