1 1
2.0.7. SETTING THE BACK HEIGHT
Release the handle located on the back. Adjust the back.
Remember to tighten the handle afterwards.
2.0.4. SETTING ANGLE OF SEAT
Adjusted by pulling up the middle handle on the right-hand
side.
2.0.5. SETTING ANGLE OF BACKREST
Adjusted by pulling up the rear handle on the right-hand side.
Only operate the handle when someone is sitting in the chair -
as the backrest tilts forward.
2.0.6. ADJUSTING LUMBAR SUPPORT*
The backrest can be adjusted to provide optimal lumbar
support by pulling up the handle on the right-hand side of
the backrest. The backrest adjusts to fit and support the lower
back. Release the handle, and the backrest remains in the
desired lumbar angle.
ALB
BACK
*
Depending on model
Note:
Setting the angle of backrest and seat should
always be done with your feet flat on the floor.
