1.1.3. assistance exiting the chair
The electric seat lift can help in connection with entering and exit-
ing the chair. For instance, the electric seat lift can be placed in the
highest position before sliding out over the front edge of the seat
with legs as stretched out as possible. The reverse procedure can be
followed when entering the chair.
If the powerchair is equipped with a power tilt function, tilting the
seat can be very helpful when exiting the chair: With the seat tilted
forwards, not as much strength is needed to climb out of the chair.
Do the opposite when entering the chair: With the seat tilted
backwards it is easier to climb into the chair.
4.0. maintenance and troUBleshooting
4.0.1. cleaning
Wipe/wash the wheels as needed using mild soap and water. Wipe
the protective motor cover with a soft cloth. Do not use abrasive
sponges or brushes. Clean the seat and back with a vacuum
cleaner or a brush. The fabric is a standard wool type, which has
been chosen for optimum comfort. It is not recommended that the
seat cover be washed as it may shrink. Dry-clean only.
The control box can be cleaned with a damp cloth and a little
washing-up liquid if necessary. The armrests can be wiped off with
a damp cloth and warm soapy water if necessary. The armrest is
normally covered in leather, and organic solvents must therefore
never be used.
4.0.2. maintenance
Daily maintenance can be carried out by the user. Repairs and
servicing must be carried out by trained service staff or by a VELA
service technician. It is recommended that the powerchair is
serviced once a year by a VELA service technician when all moving
parts will be lubricated and checked for wear.
4.0.3. troUBleshooting
If your VELA Blues 200 should stop working, check the following
first:
chair does not start
• Check that the connection handles are in the Drive position.
• Check the battery to see whether it is charged.
• Check that the overload protection is disengaged: Press the
overload switch all the way in (when the overload protection is
disengaged, the battery indicator will flash brightly).
the poWerchair rUns sloWly
• Check that the seat is in the lowest position.
• Check that the speed selector on the control box is on max.
chair loses poWer
• Check that the charging unit is connected correctly.
• Check that the charging functions normally (read LED lights on
front panel of charger).
• Call a service technician to have the condition/age of batteries
checked.
• Call a service technician to have the wiring to batteries checked.
6
19
Connection handles
Overload protection
