background image

12

1.2. operaTion

Vr2 ConTrol box

VELA Blues 100 will normally be equipped with a Vr2 control box.
The powerchair is turned on and off with the I/0 button.
To operate a function, press the left button = electric seat lift. To 
operate a function, push the joystick forwards (up) or backwards 
(down).

The ‘speed up’ button increases operating speed: Press the button 
repeatedly and you will see the indicator light move up.

The ‘speed down’ button reduces operating speed: Press the button 
repeatedly and you will see the indicator light move down.
Two of the powerchair’s functions are controlled from the control box 
(normally lift and tilt). Choose one of the functions by pressing the 
function button, pushing the joystick forwards to move forwards or 
backwards to move backwards. (It is possible to change between the 
two functions by moving the joystick to the side). The control box has 
a signal horn.

sTeering WiTh The JoysTiCK

Move the joystick in the direction you want the chair to move. 
Acceleration and speed are controlled by moving the joystick: 
Large movement = fast acceleration and high speed. 
Small movement = slow acceleration and low speed.

It is not possible for the user to reprogram the control box.

Warning!

 Do not subject the joystick and control box to vertical 

pressure and do not push hard on the joystick as this can damage 
parts in the box!

5

WhaT To do

1.  Park the chair and turn off the power (press the I/0 button).

2.    Plug the charging unit into the socket on the front of the 
 

underside of the control box. 

noTe!

 The chair cannot be   

 

turned on when the charging unit is connected.

3.   Plug the charging unit to the mains power (230 V) and turn it 

on. The yellow light on the front panel of the charger shows 
that the batteries are being charged.

4.   When the batteries are fully charged, the “completed” light on 

the front panel of the charger will be green.

noTe!

 for extended periods of disuse (days/weeks/months) 

the battery charger should be connected to ensure optimum 
power when your VELA Blues 100 is used again.

noTe!

 In some cases, batteries that have been run down too far 

(flat) cannot be recharged by the charging unit. This is for your 
own safety, because dangerous vapours can develop when flat 
batteries are recharged. Call your VELA service technician.

5.0. MainTenanCe and TroubleshooTing

Cleaning

Wipe/wash the wheels as needed using mild soap and water. Wipe 
the protective motor cover with a soft cloth. Do not use abrasive 
sponges or brushes. 

Clean the seat and back with a vacuum cleaner or a brush. The 
fabric is a standard polyester type, which has been chosen for opti-
mum comfort. It is not recommended that the seat cover be washed 
as it may shrink. Dry-cleaning recommended. 

The control box can be cleaned with a damp cloth and a little 
washing-up liquid if necessary. The armrests can be wiped off with 
a damp cloth and warm soapy water if necessary. 

MainTenanCe

Daily maintenance can be carried out by the user. repairs and 
servicing must be carried out by trained service staff or by VELA´s 
service technicians. It is recommended that the powerchair is ser-
viced once a year by VELA´s service technicians when
all moving parts will be lubricated and checked for wear.

I/O = On and Off 

Speed up

Seat tilt

Joystick

Electric seat lift

Speed down

Alarm horn

Содержание Blues 100

















Отзывы: