Appendix A — General Registry Settings
93
The VTR Registry Table
Number of
pause/
resume seg-
ments.
(Old
method)
NumberOf
Segments
Int
1-3
Default: 1
Number of segments to be
encoded (with pause/resume pair
between segments). Each segment
is defined by a mark-in and mark-
out or duration. For multi-stream
encoding, the only acceptable set-
ting is 1. (See Note 1.)
Number of
pause/
resume seg-
ments.
(New
method)
MCSEMode
Int
0
Default: 0
This new pause/resume method
allows the user to schedule more
than two pauses during an encode.
Filter Manager returns a Pause
event when each segment is fin-
ished. At that time, the calling
application should write the new
Mark-In/Mark-Out pair to the VTR
Registry table, then call Resume().
To end the encode, call Resume(),
then Stop(). Note that
only
markin0, markout0, and duration0
are used with the new pause/
resume mode. Note that if a Num-
berOfSegments value of 1, 2, or 3
is entered, the old pause/resume
method is automatically invoked.
Contact Vela for sample code.
VTR Registry Table (Continued)
Property
Registry Key
Data
Type
Value Set
Comments
Table A-7. VTR Registry Table (Continued)