Dark Arts Tap Tempo Phaser Instruction Manual
Page
4
1.
Power Jack – plug a standard, centre negative 9v power
supply here. Most standard power supplies will work: if it’ll
power a Boss pedal, it’ll power the Dark Arts Tap Tempo
Phaser. Please use a true isolated pedal power source to avoid
noise or hum problems.
2.
Input – plug your guitar, or the previous effects pedal in your
chain, in here.
3.
Output – plug your amp, or the next pedal in your chain, in
here.
4.
Bypass Footswitch – turn the effect on and off with this soft
touch footswitch.
5.
Tap Tempo Footswitch – tap your desired tempo with this soft
touch footswitch. Tapping a tempo overrides the Rate control,
and turning the Rate control resets the tapped tempo.
6.
Status / Wave LED – this LED will reflect the wave you create
with the Dark Arts’ controls. This LED will light red when the
effect is bypassed, and yellow when the effect is engaged.
7.
Alternate Wave Set Switch – allows you to choose between
the Original and the Alternate Wave Sets. See page 5 for more
details about this switch.
8.
Tempo LED – this LED reflects the tempo that can be set with
either the Rate control or tapped in with the Tap Tempo
Footswitch.
© Vein-Tap.com 2019
