Veigel BHA00005, Руководство по установке

Страница: 15 / 32

5-3
INSTALLATION
The connector is designed in
such a way that it can be used on
almost every brake pedal. The
ball headed rod can be adapted to
the individual car by cutting and
bending.
On tapered pedal arms, an addi-
tional clamping screw should be
attached, in order to prevent the
connector from slipping.
Remove socket cap srews M3x12.
Fig.5-2: Brake Connector set
Fig.5-3: finished installation (example)
INSTALLATION OF BRAKE CONNECTOR SET
Parts:
Pos. 2 Connector
Pos. 8 Ball-headed Rod
Fixing parts
ACHTUNG!
After final adjustment , weld ball headed rod to connector straps. Cut off
projecting parts of rod and clamping screws!
The clamping screws may be replaced with shorter ones.
(Minimum strength 8.8)
HINWEIS