Veho Renovo Series, Руководство пользователя, Страница: 11 / 26

Using the scanner 9
En
glish
Making a scan
5. Press the Power button. The Power
indicator blinks.
NOTE
: For more information on the
indicators, see "Indicators" on page 7.
6. Wait until the Power indicator stops
blinking and then goes off. The Status/card
indicator will light up instead, indicating
that the scanner is ready.
NOTE
: Do not insert a photo into the
feeding slot when the Power indicator
is blinking. The photo will not be
scanned.
1. With the side to be scanned facing upward
and in correct orientation as indicated by
the orientation mark, place one edge of the
original on the scanner and adjust the guide
lever so that the original aligns against the
left side of the feeding slot.
Insert the original into the feeding slot.
WARNING
: Do not scan glossy
photos in humid environments
(humidity higher than 70% RH).
Otherwise the surface of the photo
will become sticky and cause the
scanner to jam.
2. The original will be fed into the slot and
scanned automatically. The Power and
Status/card indicators blink while scanning.
NOTE
: See "More information" on
page 13 for how to insert photos and
other types of originals.
Align left