Version 0.5
26 August 2004
Page 3 of 37
For use with Vega 50 FXO – H.323 version 04.01.05.1 T017 or greater.
© 2002-2004 VegaStream Ltd.
1. Connect your Vega to LAN, Telephone and Power
Serial (RS232)
LAN
POTS port 8
Power Switch
AC Power
POTS port 1
Before installing your Vega, ensure that you read the VegaStream VoIP Gateways Safety
and Compliance Information document.
LAN:
Using the yellow booted cable connect the LAN port on the Vega to a standard or fast Ethernet
hub or switch (10 baseT or 100 baseTx). The connector nearest the ferrite core should be
plugged into the Vega.
Telephony:
Connect the PBX or CO switch to the 8 POTS ports. Note the port numbers (interface Ids)
increase in an anticlockwise direction from the bottom left corner. Interface IDs are as follows:
13
12
11
10
06
07
08
09
Power:
Insert the power cable into the AC power inlet on the Vega and switch on. The power LED on the
front panel will illuminate.
The LAN LEDs will also illuminate indicating 10 (baseT) or 100 (baseTx) connection, and the FDX
LED will illuminate if Full Duplex mode has been negotiated.
