Version 0.5
29 November 2004
Page 13 of 35
For use with Vega 50 8 FXS + 2 FXO – H.323 version 09.01.05.2 T003 or greater.
© 2004 VegaStream Ltd.
Now create a new profile and in it create a dial plan entry to handle calls being received inbound
from the LAN:
In a similar manner to adding profile 2 add another profile, profile 3,
Set Name =
Inbound_from_LAN
Modify the first plan for Profile 3:
Set Name = To_FXS_
Tel_Ports
Set Source =
IF:05,TEL:4<..>
(For calls from IF:05 (H.323), this takes the
three digit extension number (4xx) and stores
the latter two digits in store <1>)
Set Destination =
IF:<1>
(Use the 2 digits in store <1> as the interface
ID (telephone) to ring)
Select
and then click “
here
” to return
Add a new plan to Profile 3:
Set Name = To_FXO
_Port_1
Set Source =
IF:05,TEL:9<.*>
(For calls from IF:99 (SIP),where the leading
digit is a 9, take any following digits presented
as the telephone number and store them in
store <1>)
Set Destination =
IF:56,TEL:<1>
(Route the call to the first FXO port, and DTMF
outdial any digits that were received after the
9)
Select
and then click “
here
” to return
Add a third plan to Profile 3:
Set Name = To_FXO
_Port_2
Set Source =
IF:05,TEL:8<.*>
(For calls from IF:99 (SIP),where the leading
digit is an 8, take any following digits
presented as the telephone number and store
them in store <1>)
Set Destination =
IF:57,TEL:<1>
(Route the call to the second FXO port, and
DTMF outdial any digits that were received
after the 8)
Select
and then click “
here
” to return
The profile 3 plans should look as follows:
