background image

26

8 Dismount

VEGAVIB 63 • NAMUR

31217-EN-170315

8 Dismount

8.1  Dismounting steps

Warning:

Before dismounting, be aware of dangerous process conditions such 

as e.g. pressure in the vessel, high temperatures, corrosive or toxic 

products etc.
Take note of chapters "

Mounting

" and "

Connecting to power supply

and carry out the listed steps in reverse order.

With Ex instruments, the housing cover may only be opened if there is 

no explosive atmosphere present.

8.2 Disposal

The instrument consists of materials which can be recycled by spe-

cialised recycling companies. We use recyclable materials and have 

designed the electronics to be easily separable.

WEEE directive 2002/96/EG

This instrument is not subject to the WEEE directive 2002/96/EG and 

the respective national laws. Pass the instrument directly on to a spe-

cialised recycling company and do not use the municipal collecting 

points. These may be used only for privately used products according 

to the WEEE directive.
Correct disposal avoids negative effects on humans and the environ-

ment and ensures recycling of useful raw materials.
Materials: see chapter "

Technical data

"

If you have no way to dispose of the old instrument properly, please 

contact us concerning return and disposal.

Содержание VEGAVIB 63





































Отзывы: