VEGACAL 63 - 34606-EN-160112
VEGA Grieshaber KG, Am Hohenstein 113, 77761 Schiltach/Germany, www.vega.com
Specification sheet
Operation
The adjustment of the instrument is carried out via the optional display
and adjustment module PLICSCOM or via a PC with the adjustment
software PACTware and corresponding DTM. Further adjustment op-
tions are available via HART communicator as well as manufacturer-
specific programs such as AMS™ or PDM.
Electrical connection
I²C
Display
1 2
5 6 7 8
3
4
1
2
Electronics and terminal compartment, single chamber housing
1
Plug connector for VEGACONNECT (I²C interface)
2
Spring-loaded terminals for connection of the external indication VEGADIS 61
3
Ground terminal for connection of the cable screen
4
Spring-loaded terminals for voltage supply and signal output
You can find details on electrical connection in the instrument operating
instructions on our homepage at www.vega.com/downloads.
Dimensions
2
3
1
L
L
SW 36 mm
(1.42")
G ¾
56 mm (2.21"
)
56 mm (2.21"
)
22 mm (0.87"
)
ø 16 mm
(0.63")
102 mm (4.02"
)
ø 40 mm
(1.58")
1
Threaded version
2
Flange version
3
Threaded version with temperature adapter
Information
You can find further information about the VEGA product line on www.
vega.com.
In the download section at www.vega.com/downloads you'll find operat-
ing instructions, product information, brochures, approval documents,
instrument drawings and much, much more.
There, you will also find GSD and EDD files for Profibus PA systems as
well as DD and CFF files for Foundation Fieldbus systems.
Instrument selection
With the "
Finder
" at www.vega.com/finder and "
VEGA Tools
" you can
select the most suitable measuring principle for your application.
You can find detailed information on the instrument versions in the
"
Configurator
" at www.vega.com/configurator and "
VEGA Tools
".
Contact
You can find the VEGA agency serving your area on our homepage
www.vega.com.
